Pressure cleaning is one of those inventions that increase our property’s longevity. The powerful spray produced by these tools is the reason behind their success in cleaning tough and porous materials like wood. Therefore, the cleaners have to protect themselves with eyewear, heavy-duty gloves, and thick boots.
The experts in pressure washing Walton on Thames suggest you brace up with protection. The spray is strong enough to knock up pebbles, dirt, and small rocks. Consider covering gardens, shrubs, and air conditioners with a drop cloth before you begin. This will minimize unwanted splashing and protect your property from flying debris and powerful spray.
Surrey Pressure Cleaning gives you some useful hacks to pressure clean your deck. Continue reading:
Attach the Spray Nozzle to the Pressure Washer
Attaching a nozzle to the pressure washer gives the correct angle and water pressure for cleaning the deck. Soap-dispensing nozzle would be the correct choice to start with. A wide nozzle ensures that the initial water pressure is relatively low. Spray nozzles are color-coded to help indicate the spray pattern.
- Green indicates that a nozzle sprays at 25 degrees
- White indicates that a nozzle sprays at 40 degrees
- Red indicates that a nozzle sprays at 0 degrees
- Yellow indicates that a nozzle sprays at 15 degrees
- Black indicates that a nozzle dispenses soap and significantly restricts the pressure.
Connect and Turn on the Pressure Washer
The experts in pressure washing Walton on Thames suggest that you should connect the pressure washer hose to the pressure washer and turn it on. Make sure that the hose has a clear path to the pressure washer and the area where you will be working so that it doesn’t kink or catch, blocking the flow of water into the pressure washer.
Now, set the pressure washer to the lower power setting and pull the trigger. It’s to test the current water pressure output. It’s recommended to start in an inconspicuous part of the deck, in case the initial flow of water damages the surface of the wood.
Add Deck Cleaning Solution to the Pressure Washer
There is no better option than a deck cleaning solution to remove tough, stuck-on oils and grime, though we can pressure wash a deck without it. Pour the solution into the dispenser on the pressure washer after mixing the cleaning solutions with water.
When you try the best pressure washing Walton on Thames, Surrey Pressure Cleaning, there is less chance of not getting the exact mixture ratio. But, here’s a DIY alternative provided where you can mix 1 cup of white distilled vinegar with 1 gallon of water.
Apply the Deck Cleaning Solution
With the black soap-dispensing nozzle attached to the pressure washer, begin to apply the deck cleaning solution to the deck. Use long, broad strokes with the pressure washer wand to ensure that the cleaning solution reaches the entire deck, including every corner, crack, or crevice.
Pressure Wash the Deck
The powerful water pressure generated by a pressure washer will do most of the work. Now, your job is to control the water pressure and the aim of the pressure washer wand. Choose a side to start from and begin pressure washing the deck in wide, horizontal swaths.
Work row by row and remember that it will take multiple applications of deck cleaning solutions.
Let the Deck Dry before Sanding, Staining, or Sealing
Do not walk on the deck before it dries out. It may take up to 2 days before getting fully dry. Once the deck is fully dry, you may want to take on an additional project to reduce deck maintenance in the future.
“A sander can remove any blemishes from the surface of the deck,” says the experts in pressure washing Walton on Thames. After sanding, it’s a good idea to pressure wash the deck again to remove any sand particles before staining or painting. Do not forget to dry the deck after this second washing so that the stain or paint can effectively bond to the wood.